Cut glass smooth edges


There are several methods for cutting tiles by hand without a tile cutter, using a cutting tool such as a glass cutter or a carbide-tipped pencil. Before using any tool to cut tile, measure the glazed side of the tile to determine where you need to make the cut. Use a straight edge to mark the line with an erasable marker.We're showing how to cut a hole that's entirely within a single tile, one of the most difficult cuts. In the next section we'll show you an easier method to use for cutting curves in the edge of a tile. Even with this method, try to avoid a tile layout that places the edge of the circular cutout less than 1/2 in. from the edge of a tile.Knowing how to cut and smooth glass edges is useful for a variety of applications such as replacing windows, making stained glass, or putting together picture frames. Cut glass by scoring a mark on it with a rolling wheel made of a hard substance such as diamond or tungsten carbide. Then break it ...Wear a mask as to not directly breath in the glass particles. Wear long sleeves - it can get very itchy. Of course wear proper eye protection. Have a cloth table to work on rather than hard or rough work bench.In the case of a straight cut, it is recommended to use a straight edge as a guide and clamp it to the glass to prevent it from moving. On the other hand, don't use cutting guidelines if you want to cut the glass freehand. Step 3 - Starting and Finishing the Job. Turn the Dremel to a power setting between six and eight and start cutting the ...